AI-Powered Tools

Door Schedule Takeoff

Count doors from the door schedule table on a sheet, broken out by door type, frame type, and hardware group.

Steps

1. Open the sheet that has the door schedule. Like other Auto Takeoff options, it needs a confirmed scale and the sheet at its original 0 degree rotation.
2. Open the Auto Takeoff (lightning bolt) menu, click Doors, and choose Takeoff from door schedule. (Door count (single / double) detects the doors drawn on the plan instead.)
3. Yanno reads the schedule table. Nothing on the plan is detected.
4. Results appear in a Door Schedule group under Auto Takeoffs, whose header shows the door total. Each value gets its own count row, such as "Door Type A", "Frame Type 1", or "Hardware Group 4".
5. Dot markers sit on the schedule table, in the column each count came from, so you can check the counts against the schedule.

Notes

• •If no schedule is found, you'll see "No door schedule found on this sheet."
• •Running it again on the same sheet replaces that sheet's schedule counts. Schedule counts on other sheets stay.
• •A blank cell in the schedule is counted as "unspecified" (for example "Frame Type unspecified").